Results

We found
78
matching items
Geographic Location
Regional Municipality of Niagara
  
list thumb list 2 columns gallery
  • Clay Pipe with Masonic Insignia c.1800
    Object       A white clay pipe that has a Masonic insignia design on the bowl. The broken stem is two inches in length
    Object     A white clay pipe that has a Masonic insignia design on the bowl. The broken stem is two inches in length
  • Leather Document Box
    Object       A white leather document box lined with an issue of The Bee newspaper.
    Object     A white leather document box lined with an issue of The Bee newspaper.
  • 1st (Royal Scots) Regiment Cross Belt Plate c.1812
    Object       This is a brass cross belt plate of the 1st (Royal Scots) Regiment. It is rectangular with an oval scotch thistle in the centre with lettering (illegible) around it and a crown on top. There is also a banner at the bottom. The belt plate measures 5.5cm x7cm and 2 ...
    Object     This is a brass cross belt plate of the 1st (Royal Scots) Regiment. It is rectangular with an oval scotch thistle in the centre with lettering (illegible) around it and ...
  • Stove Pipe Shako Plate c.1803-1812
    Object       This is a regulation issue plate for a stove pipe shako that was supplied to infantry regulars between 1803 and 1812. There is a Hanoverian crown on the crest with the “GR” cipher of George III surrounded by a Garter containing the motto of the Royal family. The motto is ...
    Object     This is a regulation issue plate for a stove pipe shako that was supplied to infantry regulars between 1803 and 1812. There is a Hanoverian crown on the crest with ...
  • Glengarry Light Infantry Cross Belt Plate c.1812-1816
    Object       This is a square cross belt plate of the Glengarry Light Infantry, a Canadian Provincial Corps. It has a scotch thistle in the centre with “GLENGARRY LIGHT INFANTRY” inscribed around it. The Glengarry Light Infantry participated at the following engagements: Salmon River, Ogdensburg, York, Fort George, Sackett’s Harbour, Oswego, Lundy’s ...
    Object     This is a square cross belt plate of the Glengarry Light Infantry, a Canadian Provincial Corps. It has a scotch thistle in the centre with “GLENGARRY LIGHT INFANTRY” inscribed around ...
  • Musket Balls from Niagara Battlefield Sites
    Object       A collection of musket balls found at one of Niagara's battlefield sites. Sizes range from 1.8 to 1.5 to 1.2 cms.
    Object     A collection of musket balls found at one of Niagara's battlefield sites. Sizes range from 1.8 to 1.5 to 1.2 cms.
  • Muskets Balls
    Object       These musket balls were found at one of Niagara's battlefield sites. It appears, due to their deformation, that they have been fired from a musket.
    Object     These musket balls were found at one of Niagara's battlefield sites. It appears, due to their deformation, that they have been fired from a musket.
  • Military Sword of Capt. Thomas MacMicking (McMicken) 1812-1814
    Object       A sword made of solid brass but the grip has been embellished with tightly bound silver wire. The pommel and joints of the handle have scroll work and engravings. The brass hilt also has scroll work and folds down on one side to allow for easier carrying on the hip ...
    Object     A sword made of solid brass but the grip has been embellished with tightly bound silver wire. The pommel and joints of the handle have scroll work and engravings. The ...
  • Scabbard
    Object       A scabbard with a gilt top was part of an infantry officer’s sheath, pattern 1796. It is black leather with gilt binding, frog clip and sash ring. The top gilt piece has become detached from the leather. It is engraved: Wand C. Prater, 6 Charing Crofs, London.
    Object     A scabbard with a gilt top was part of an infantry officer’s sheath, pattern 1796. It is black leather with gilt binding, frog clip and sash ring. The top gilt ...
  • British Bayonet c.1812-1814
    Object       This is a bayonet that would have been designed to fit on the muzzle of a rifle or musket. Unique markings include a crown with the inscriptions “40”, “WHEELER”, “O”, and a “V” on the front of the blade. On the socket there are also inscriptions which are “QLI” (underlined) ...
    Object     This is a bayonet that would have been designed to fit on the muzzle of a rifle or musket. Unique markings include a crown with the inscriptions “40”, “WHEELER”, “O”, ...
  • Brown Bess Bayonet
    Object       This bayonet would have been designed to fit on the muzzle of a Brown Bess musket. It is slightly bent at the tip and unique markings on the blade include: a crown with “31”, “I. Salter” and what looks to be a carved “I”. The bayonet blade is 42cm long ...
    Object     This bayonet would have been designed to fit on the muzzle of a Brown Bess musket. It is slightly bent at the tip and unique markings on the blade include: ...
  • Homemade Bayonet c.1812-1814
    Object       A homemade bayonet that was designed to fit on the muzzle of a rifle or musket. It is of the styling favored most by the militia units during the War of 1812. Its unique length and lack of a rear reinforcing ring confirms this weapon was not manufactured by an ...
    Object     A homemade bayonet that was designed to fit on the muzzle of a rifle or musket. It is of the styling favored most by the militia units during the War ...
  • British Bayonet Sheath
    Object       This is a black leather bayonet sheath that measures 37.5cm in length. There is also a frog clip that was used to mount it on a belt. Stamped into the sheath near the frog clip are the markings: “E”, an arrow, “D” and a crown just above. These markings tell ...
    Object     This is a black leather bayonet sheath that measures 37.5cm in length. There is also a frog clip that was used to mount it on a belt. Stamped into the ...
  • Flint
    Object       This is a piece of flint that was unearthed at one of Niagara’s Battlefields. It would have been used to light a flintlock musket when firing at the enemy.
    Object     This is a piece of flint that was unearthed at one of Niagara’s Battlefields. It would have been used to light a flintlock musket when firing at the enemy.
  • 70th Surry Regiment of Foot Buttons
    Object       t has “70” raised in the centre surrounded by a raised laurel wreath. “SURRY” is also raised across the top of the button. This regiment was raised in 1782 and sailed from Cork, Ireland to Lower Canada in August 1813. They were stationed in Quebec and participated at the battle ...
    Object     t has “70” raised in the centre surrounded by a raised laurel wreath. “SURRY” is also raised across the top of the button. This regiment was raised in 1782 and ...
  • 70th Surry Regiment of Foot Buttons
    Object       A button of the 70th Surry Regiment that is 1.9 cm in diameter. It has “70” raised in the centre surrounded by a raised laurel wreath. “SURRY” is also raised across the top of the button. This regiment was raised in 1782 and sailed from Cork, Ireland to Lower Canada ...
    Object     A button of the 70th Surry Regiment that is 1.9 cm in diameter. It has “70” raised in the centre surrounded by a raised laurel wreath. “SURRY” is also raised ...
  • Various Military Remnants Found at Niagara Battlefield Sites
    Object       These artifacts are mounted on red felt to the back of its case (A). The items are (from left to right): B. A piece of an unidentified metal object that looks like a scraper and two musket balls C. Remnant of a small brush and wooden handle D. Remnant of ...
    Object     These artifacts are mounted on red felt to the back of its case (A). The items are (from left to right): B. A piece of an unidentified metal object that ...
  • 67th (South Hampshire) Regiment of Foot Button
    Object       This regiment was formed in 1758 and was amalgamated into The Hampshire Regiment in 1881.
    Object     This regiment was formed in 1758 and was amalgamated into The Hampshire Regiment in 1881.
  • King George III 1807 Coin
    Object       The one side of this copper coin has the inscription “GEORGIUS 17” AND “D.G. REX 1807” with the King’s profile. The other side has “BRITANNIA” with an image of Britannia. It measures 2.5cm in diameter.
    Object     The one side of this copper coin has the inscription “GEORGIUS 17” AND “D.G. REX 1807” with the King’s profile. The other side has “BRITANNIA” with an image of Britannia. ...
  • Cannon Balls c. 1812-1814
    Object       Set of cannon balls that were unearthed in one of Niagara's battlefield sites.
    Object     Set of cannon balls that were unearthed in one of Niagara's battlefield sites.
Search within these results
Sort
Contributors
Media Types
Groups
Subjects
See more ...
See fewer ...
Sort A-Z...
Sort by hits...
Item Types
Years
18101810181118121813181418151816181718181819
Features
Map
Map of locations associated with these pictures. Click on a balloon to do a geographic search.
Web Tools
See Alternate Formats:
Atom | RSS | Dublin Core | Mods | Solr
Powered by / Alimenté par VITA Toolkit